الثلاثاء، 28 أبريل 2009

company address

GUANGZHOU BORCH MACHINERY CO., LTD
Booth: 4.1G11
Company Address: NO.9xinxiang road,zengcheng industrial park,, xitnag town,guangzhou city,guangdong P.R.C,
Region: China
Phone: 86-20-32878000
Fax: 86-20-32878059
Email: mk07@borch.cn Contact Us
Website: http://www.borch-machinery.com
Product Name: BORCH BS SERVO POWER SAVING INJECTION MOLDING MACHINE
Product Information: This "BS" machine Comparing with traditional molding machine, the power consumption can reduce up to 40%-80%. Power saving occurred during low system flow rate process such as pressure holding and cooling. BS machine is low power consumption machine, help protecting our future environment.
ZHONG TAI PRECISION MACHINERY(GUANG ZHOU) CO.,LTD
Booth: 2.1G31
Company Address: 2,Jian Ye 1 Road,East Division, Guangzhou Economic & Technological, Development District,P.R.C
Region: Taiwan
Phone: 86-20-82264885
Fax: 86-20-82264861
Email: m6104@mail.or.com.tw Contact Us
Website: http://www.or.com.tw
Product Name: PLASTIC INJECTION MOLDING MACHINE
Product Information: Victor PIM department had developed the plastic injection molding machine from 30~2000ton, all electrical V?-series from 50~300ton.
FOMTEC PLASTIC MACHINERY(GUANGZHOU) CO., LTD
Booth: 2.1A21
Company Address: HUAXING IND.PARK, JINHU ROAD, XINHUA
Region: China
Phone: 86-20-36850111
Fax: 86-20-36850100
Email: fomtec1@163.com Contact Us
Website: http://www.fom-tec.com
GUANGDONG XUNSLUX FORSTAR PRECISION MACHINE CO.,LTD.
Booth: 2.1K41
Company Address: XINSONG SECTION,GUANGZHOU ROAD, DALIANG SHUNDE AREA, FOSHAN CITY,GUANGDONG
Region: China
Phone: 86-757-22309260
Fax: 86-757-22916589
Email: sale@forstar-pm.com Contact Us
Website: http://www.forstar-pm.com
Product Name: INJECTION MOLDING MACHINE
Product Information: Forstar's main products: KTV variable pump series, KTS servo series, Batelite series, Large-scale series, PET series and UPVC series. We insist on the concept of “customer supreme” and overall promote the customer satisfactory to guarantee the product quality, provide the sincere service to the customers and bring the most benefits to them.
GUANGDONG KAI MING ENGINEERING CO.,LTD.
Booth: 8.1C41
Company Address: Pingdi Dvevlopment Zone, Yanbu, Nanhai, Foshan, Guangdong, China., ,
Region: China
Phone: 86-757-88396238
Fax: 86-757-88396200
Email: sales@km-machine.com.cn Contact Us
Website: http://www.km-machine.com.cn
Product Name: GUANGDONG KAI MING ENGINEERING LTD
Product Information: Guangdong Kaiming Engineering Co,. Ltd located in the golden commercial industrial zone between Guangzhou and Foshan.
POWERJET PLASTIC MACHINERY CO., LTD.
Booth: 8.1A21
Company Address: NO. 12, Bo Ai Road East, Zone B,, Shishan Industrial Park , Nanhai, Foshan,, Guangdong, P .R.China
Region: China
Phone: 86-757-86697588
Fax: 86-757-86697566
Email: powerjet@126.com Contact Us
Website: http://www.powerjet.cn
YIZUMI PRECISION MACHINERY (HK) CO., LIMITED
Booth: 4.1K01
Company Address: NO.22 KEYUAN 3 ROAD RONGGUI, ,
Region: China
Phone: 86-757-28686000
Fax: 86-757-28686023
Email: info_yizumi@126.com Contact Us
Website: http://www.yizumi.net
Product Name: PLASTICS MACHINERY
Product Information: 1.hopper dryer series 2.powerful crusher series 3.Temperature controller series 4.mould-temperature controller 5.full automatic uacuum filling machine 6.dryer mixing machine series 7.cooling tower series
Cosmos Machinery Ltd.
Company Address: 15, Jianshe Road, Dongguan, Guangdong Province, China
Phone: +86-769+22417755 22806210
Fax: 86-769-22415786
Website: www.cml.com.cn
Email: info@cml.com.cn
Contact Person Name: Ms Simone Hu
Contact Person Title: Assistant Manager of International Trade
DONGHUA MACHINERY LTD.
Booth: 4.1A41
Company Address: 15 JIANSHE RD, DONGGUAN CITY, GUANGDONG PROVINCE
Region: China
Phone: 86-769-22417755
Fax: 86-769-22415786
Email: info@cml.com.cn Contact Us
Website: http://www.donghua-ml.com
Product Name: DONGHUA MACHINERY LTD.
Product Information: Specialized in energy-saving, high speed & precision; two-platen, multi-material, thin-wall, PET, PVC and economical serial type injection moulding machine, with clamping force 25Ton to 4000Ton.
ELITE MACHINERY (DONG GUAN) COMPANY LIMITED
Booth: 4.1F55
Company Address: ELITE INDUSTRIAL AREA, MEILIN VILLAGE,, DALING MOUNT TOWN,, DONGGUAN CITY , P.R.C.
Region: China
Phone: 86-769-85635008
Fax: 86-769-85785005
Email: ck.sze.epm@elitecorp.com Contact Us
Website: http://www.elite-machinery.com
Product Name: LONG DISTANCE MONITORING SYSTEM, IN-MOULD LABELING, IN-MOULD DECORATION, ENERGY SAVING
Product Information: In Chinaplas 2009, Elite will display the following products with high technology. Long-Distance Monitoring System can help the factory increase production efficiency & reduce the monitoring cost. Servo Motor (Energy Saving) series with Rexeroth Servo Motor ensure the energy cost should be reduced. IML & IMD Series are the environmental friendly products, which not only help for the environmental protection, but also increase the product value and less the production cost. Please kindly come to our booth Hall 4.1 / F55 to visit our high end products.
TAT MING TECHNOLOGY CO LTD
Booth: 9.1A51
Company Address: UNIT 919, TOWRER A, REGENT CENTER
Region: China
Phone: 86-0769-85315192
Fax: 86-0769-85315190
Email: tatming@dongguan.gd.cn Contact Us
Website: http://www.tatming.com.cn
Product Name: CAP32 DP-S INJECTION MOULDING MACHINE AND 32-CAVITY CAP MOULD
Product Information: The CAP32 DP-S is designed for making28/30 mm neck finish bottle caps with a 32-cavity mould in less than 4 s of cycle time. The mould has to be fast as well. The CAP32 DP-S is driven by two servomotors/pumps. Not only is there simultaneous ejection during mould opening and closing, there is also dual-pump injection and dual-pump plasticizing. All of them contribute to the short cycle time. Servomotor also saves on power consumption, reduce noise and reduce the hydraulic oil temperature. Its performance is close to that of a fully electric machine.
LEEYUEN MACHINERY LTD.
Booth: 13.1H31
Company Address: South Suburb Industrical District, En Cheng Town, En Ping City, GuangDong, China
Region: HKSAR
Phone: 852--26015286
Fax: 852--26025571
Email: hkleeyuen@leeyuen.cn Contact Us
Website: http://www.leeyuen.cn
Product Name: INJECTION MOLDING MACHINE
Product Information: The Lee Yuen Group is invested in by Hong Kong Lee Yuen Machinery Co., Ltd in 1988. in mainland China. Our group set out our main factory in GuangDong EnPing. We also have a joint-venture in a Shijiazhuang branch factory joint venture with several other enterprises. Lee Yuen Group has many large scale and professional casting machine production assembly rooms. We also have CNC lines and a processing center imported from Japan. Our facilities can carry out production independently while processing different kinds of components and fittings. All processing work is finished at the branch factory of our group. This includes the casting work, heat processing and hard chrome plating. All of these are complex working procedures, and we want to ensure the quality of our products. We have set up offices in many countries and post-sale service centre. We can provide high-quality and fast pre-sale and added value services to our customers.
WELLTEC MACHINERY LTD.
Booth: 4.1A41
Company Address: TAI TUNG INDUSTRIAL BUILDING, , 29-33
Region: China
Phone: 852--24312111
Fax: 852--24337060
Email: info@welltec.com.hk Contact Us
Website: http://www.welltec.com.hk
Product Name: WELLTEC MACHINERY LTD.
Product Information: Specialized in energy-saving, high speed & precision; two-platen, multi-material, toy-exclusive, thin-wall, PET, PVC; and foaming machine serial type injection moulding machine, with clamping force 25Ton to 4000Ton.
YIZUMI PRECISION MACHINERY (HK) CO., LIMITED
Booth: 4.1F41
Company Address: RM 3201, 02, 32/F
Region: China
Phone: 852--31041618
Fax: 852--3104618
Email: yizumigqw@yizumi.net Contact Us
Website: http://www.yizumi.net
Product Name: INJECTION MOLDING MACHINE
Product Information: CHERACTERISTICS OF SM "NAVIGATION" SERIES INJECTION MOLDING MACHINE: 1.INNOVATION ON HYDRAULIC DRIVING TECHNOLOGY 2.EXCELLENT ENERGY-SAVING PERFORMANCE 3.PERFECT COMBINATION OF THE ELECTRICAL AND HYDRAULIC DRIVING TECHNOLOGY
Address: No. 22, Keyuan Road 3, Shunde New & High Technology Zone (Ronggui), Shunde, Foshan City
Tel: 0757-28686000?28689999?28686013
GUANGDONG ONLY MACHINERY CO., LTD.
ADDRESS: Beihai Xingye Road, Lunjiao Industrial Zone, Shunde, Foshan City, Guangdong Province, China
Zip code: 528308
Web site: http://www.cn-only.com http://www.cn-only.cn
Alibaba homepage: http://cn-only.en.alibaba.com
Export Sales Deparment:
Office tel: 86-757-27722500
+86-13924551398 (mobile phone)
Fax: 86-757-27722996 +86-757-27722992
Export Sales Manager: Mr. Michael He
E-mail: sales@cn-only.com; only-machinery@hotmail.com; only.machinery@yahoo.com
Post-sales Service Deparment:
Office tel: 86-757-27722999 +86-757-27722991
Fax: 86-757-27722533
Tian Yuan Silicone Rubber Machine
CONTACT Mr.Wu 13928898021
CONTACT Mr.Zou 13560308284
CONTACT Mandy Ding:13928798558
TEL (+086 020) 84559880 or 84559958
FAX +086 020 84559855
ADDRESS No.4 on the second Zone, liantang industrial zone, shiji town, Panyu district, Guangzhou city, P.R. China.
EMAIL auto_tianyuan@163.com
WEBSITE Http://www.gdtianyuan.cn
Foshan City Shunde Shengkai Plastic Machinery Co., Ltd.
Street Address: No.2 Xinfa Rd.,Synthetical Machining Zone of Shunde New & High-Tech Development Park, Ronggui,Shunde
City: Foshan
Province/State: Guangdong
Country/Region: China
Zip: 528305
Telephone: 86-757-28376489
Fax: 86-757-28376485
Website: http://www.sdshengkai.com
http://gdshengkai.en.alibaba.com

ليست هناك تعليقات:

إرسال تعليق

أرشيف المدونة الإلكترونية